 The retro floral print of a vintage hankie adds a pop of color and a special touch to even the most ordinary of notebooks. Create this no-sew project and show some love to your Valentine! To make this project, you’ll need:
0 Comments
 Skip the recycle bin and reuse the holiday cards you’ve received this season to make gift tags for a Christmas yet to come! To make this project, you’ll need:
  Upcycle a threadbare sweater from Christmas past to make a joyful Christmas present! To make this project, you’ll need:
1. Cut a piece of sweater fabric that is slightly larger than the embroidery hoop. Insert it in the frame. 2. Draw vertical lines spaced 1” apart on the fabric. Using chain stitch, embroider the lines with three strands of green embroidery floss (#562). 3. Draw more vertical lines ¼” from each side of the green lines. Using chain stitch, embroider the lines with blue embroidery floss (#995). 4. Repeat steps 2 and 3, but with horizontal lines. Using chain stitch, embroider the first set of lines with red embroidery floss (#666) and the second set of lines with fuchsia embroidery floss (#S602).  5. Trim the excess fabric and gather it behind the hoop. Cut a circle of felt in the same size as the hoop. Use the hot glue gun to secure the felt to the reverse side of the sweater fabric.  6. Use the hot glue gun to add small pompons in bright, complementary colors to the edge of the embroidery hoop. Use E6000 Industrial Strength Adhesive to glue pompoms to any metal parts of the frame. 7. Tie a piece of ribbon or trim to the embroidery hoop to form a hanger. It’s time to trim your tree! Merry Christmas, my dear friends!  Transform scraps of cute fabric that you can’t bear to part with to pumpkin spice up your life! In a busy season full of hayrides, apple picking, and costume parties, get your pumpkin fix in a flash with this speedy craft. To make this project, you’ll need:
1. Create a teardrop-shaped template that is about the same width (2”) and length (6.5”) as a segment of the crafting pumpkin. 2. Iron the fabric you’ll use to decorate the pumpkin. Pin the template to the fabric and cut 12 pieces of fabric to cover the pumpkin.  3. One segment at a time, attach the fabric to the crafting pumpkin with a thin layer of hot glue. For each segment, start by gluing the fabric at the bottom of the pumpkin and work your way up to the stem. Trim any excess fabric near the stem. Slightly overlap each piece of fabric to avoid gaps.  4. Cover the gap at the bottom of the pumpkin with a small circle of fabric. Do the same thing with any other gaps. 5. Use sequin pins to secure twine in a contrasting color to the raw edges of the segments of fabric.  6. Pin twine at the base of the pumpkin’s stem. Continuing upward, use hot glue to secure the twine as you wrap the rest of the stem with it. Enjoy your pumpkin! Create just one or make an entire pumpkin patch. Try using vintage hankies or a variety of printed fabrics on the same pumpkin. Have a wonderful, creative fall! Baking is one of the best ways to welcome cooler weather. Bismarck cookies are citrusy like summer, spicy like fall, and sweet like life! Are Bismarck cookies a tribute to a political figure, a city in North Dakota, or a family? We’ll never know. This recipe can’t be found with a Google search, but if Mrs. Williams included it in her recipe book, it had to be good!  To make Bismarck cookies, you’ll need: - 2 eggs - 1/3 teaspoon cloves - 1/2 cup powdered sugar - 1 tablespoon orange peel, cut finely - 3/4 cups flour - 1/3 teaspoon salt - 1/2 lemon rind, grated - 1/3 teaspoon cinnamon - 3/4 cups slivered almonds 1. Preheat the oven to 350 °F. Grease a cookie sheet. 2. First, whisk together the dry ingredients. Then, mix in the wet ingredients. Finally, add the slivered almonds. 3. Drop dough onto the baking sheet by the spoonful. 4. Bake the cookies for 12 to 13 minutes or until they are slightly browned. 5. Remove the cookies from the oven and allow them to cool. It’s cookie time!  Concentric features upcycled denim and linen and a vintage mother-of-pearl button. The circular motif represents living an eco-friendly lifecycle by reducing, reusing, and recycling. The overlapping of some spheres and the ripple effect of others alludes to the power of our social circles to circulate new ideas and inspire change. This piece was created on a canvas painted with acrylic paint and embellished with pre-loved, distressed textiles and straight stitch, backstitch, and French knots.  Do over some pre-loved denim to make a patriotic sign decked out with stars and stripes that will take you from Memorial Day to Labor Day! To make this project, you’ll need:
 1. Stretch a piece of pre-loved denim over an 8” by 10” canvas. Click here to view a past blog post with step-by-step instructions on how to do so.  2. In the top left quarter of the canvas, add stars with the white Tulip Slick Dimensional Fabric Paint. Allow the paint to dry for at least 4 hours before continuing to the next step.  3. Use pieces of Scotch tape to cover where the red stripes will appear on the flag sign. In the open space, draw stripes that still let some of the denim show through with the white Tulip Slick Dimensional Fabric Paint. Allow the paint to dry for at least 4 hours before continuing to the next step.  4. Remove the Scotch tape from the denim. Draw the remaining stripes with Tulip Slick Dimensional Fabric Paint in deep red. Allow the paint to dry for at least 4 hours before continuing to the next step. 5. To create a hanger for the sign, cut a 15” length of 5/8” ribbon and staple it to the upper corners of the reverse side of the canvas. Have a fun, safe Fourth of July, friends! Think outside the box! The only thing that’s easier than making this decadent cake from scratch is eating it! To make chocolate nut cake, you’ll need:
To make chocolate glaze, you’ll need:
Hands-down, I delight in destroying and transforming denim much more than I enjoy wearing it! When my jeans are on their last legs, that means the best is yet to come. My interest in sustainability began in my college years. For a time, I was a janitor. I cleaned up messes that words don’t suffice to describe, wrangled with trash bags, and hauled away recyclables. At some point, my inner dialogue shifted from a stream of complaints to a realization that I was living in a laboratory with an opportunity to make observations about habits and attitudes related to consumption and waste. What stays with me to the present is the magnitude of waste that accumulated every day and my shock at how we waste resources without giving it a second thought. My least favorite job was an eye opener and a part of why I’m upcycling today.
With creativity, there’s infinite potential in anything. An item can have many uses beyond its original purpose just like how a person moves at a different tempo and has unique goals and dreams at every phase of life. Seeing the circularity and potential for change in an object reminds me of humanity’s capability to reimagine and reconfigure its future. Reduce, reuse, upcycle!  When refrigerated properly, milk has a shelf life of just a few weeks. We quickly consume the servings in a bottle and it’s on to the next one. It’s a different story for the durable #2 high-density polyethylene container that milk is stored in. Even if a plastic item is recycled, a lot of energy and resources are required to sort, sanitize, and break it down into a reusable form such as pellets. Many of the plastic items that we put in our recycling bins are ultimately disposed of. It can take up to 1,000 years for a #2 plastic item to fully decompose in a landfill. When plastics break down in waterways and oceans, the ecosystem becomes polluted with microplastics that are harmful to wildlife and people. Instead of burdening recycling facilities or possibly adding waste to a landfill, tap into your creativity to upcycle #2 plastic. Make a milk container mansion to welcome back your feathered friends this spring. They’ll enjoy living in sustainable luxury. Nest sold separately! To create this project, you’ll need:
1. Begin by sanitizing the empty milk container with a spray of all-purpose cleaner with bleach and hot water. Peel the label off the container with Goo Gone Adhesive Remover. Be sure to save the bottle’s cap so the resident bird family has a watertight roof! 2. Make an entryway for the birds by poking a hole into one of the jug’s indentations. Use a pair of scissors to cut out more plastic to form a door. 3. Decorate the container with Sharpie permanent markers. The quintessential bungalow homes of Milwaukee inspired me to design this project. I’m fascinated by their charming stained-glass windows, built-in cabinets, gable roofs, and brick exteriors. Let wherever you live inspire your design or choose your favorite places to visit! 4. After the marker has fully dried, paint the milk container with two coats of Sculpey Gloss Glaze for polymer clay to protect your design. Follow the instructions on the glaze container. Your birdhouse is move-in ready! Securely attach it somewhere outside by threading a piece of floral wire through the container’s handle. |
Hello, there!
Thanks for visiting! Archives
December 2021
Categories |
RSS Feed